The most important step when applying any surface is prep.

Indue preps 99% of our floors using the grinders listed here. They have proven to be tough, reliable machines with a good warranty to back them up.

Coupled with a dust hub and a good vacuum you can eliminate 95% of the dust that is created when grinding your floors.

Indu-Poxy Citrus Degreaser is a concentrated industrial degreaser for oily or greasy substrates.

1 gallon will clean approximately 250 sq. ft.

I ndu-Enzyme Cleaner 300HS uses the power of enzymes to clean and degrease surfaces.

1 gallon will clean approximately 400 sq. ft.

We found these a few years ago and have really taken a liking to them.

A nitrile glove that will protect your hands whenever your handling any of our products.

Use these high quality masks when grinding or handling aggregates.

Make sure to use a dust mask when handling Cabosil!

Cupran is a high performance paint and epoxy remover for the hands.

Arretil is a skin protection cream formulated for chemicals such as epoxy and epoxy paint.

The combination of the two has been very effective for us and has saved us scrubbing time back home.

Save your knees when your prepping the floor and when your installing flooring.

These are gel filled and you’ll be glad you had a pair after kneeling down on the floor for a few hours.

If your us ing Latapoxy products, you need a good scrubby pad and an efficient way to hold them.

The extension handle allows you to get off your hands and knees.

The trowels are heat treated steel that will not rust, pit or stain. They are fitted with a camel back wood handle.

The Barwalt Grout Float is comfortable, lightweight and wear resistant with molded plastic handles. This is used when applying Latapoxy ® grouting products. The sharp edges affirm maximum removal power when drawing float diagonally over the tile.

The top-class machine for heavy-duty and demanding professional applications. Featuring a 2-speed gear unit. This is a highly powerful tool, even after continuous use. The champion of the professional tools.

Indue uses this great tool for mixing:
• Indu-Crete™ Kits
• Indu-Poxy™ 200XT Kits & Master Batches
• Indu-Poxy™ 100P 4 gal units
• Latapoxy® 2000 kits

Perles ME 160 Premium 120V, 12.2amp motor Runs at 380rpm or 530rpm. Comes with mixing paddle and carrying case.

Indue will use a gauge rake when installing 200XT over a larger area and/or to assure thickness when applying under machines.

An adjustable gauge rake will assure you that you are spreading an equal amount of material over a particular area.

Simply move the adjustable steel pins to your desired depth.

This is a standard 9” roller cage with a durable, 5-wire cage.

The 18” - “Big Ben” roller cage is made of extremely durable plastic with removable slide-in pegs.

The Spike Roller is used when applying Indu-Crete™ for rolling out trowel marks.

These are 3/16” nap roller covers used for a variety of applications including:
- rolling out trowel marks using 100P
- applying primer using 200XT
- painting using Amerlock 400.

The Loop Roller is used when applying Indu-Crete™. Use after rolling Spike Roller to bring more liquid to the surface and a smoother finished surface.

A 100% pure bristle 3” wide chip paint brush with a wooden handle. Uses include:
- coating in tight spots with 100P
- priming in tight spots with 200XT
- painting in tight spots with Amerlock 400.

Quality designed Jiffler mixing paddles perfect for mixing an entire range of Indue products.

This is a two-section telescoping pole that extends out to 8 foot.

A good tool to have when using the 9” or 18” roller to smooth out trowel marks with 100P or when your priming larger areas using 200XT.

Ideal for high spots when painting with Amerlock 400..

When you need to fix a larger floor area and you’re working with 100P or 200XT, SPIKES allow you to walk across a freshly installed area (product is still wet) without leaving a footprint.

Make sure to roll out any marks that may show up.