Picture Galleries > Industrial Floors Gallery (29)
-
-
-
Before | After Flavors Plant
Indu-Crete with a saturation of ColorQuartz, top-coated with HTS 100.
-
Before | After Over Pavers
If brick pavers are solid, we can prep the surface and install Indu-Crete right over the top.
-
Before | After Potato Chip
Tile removed and replaced with Indu-Crete.
-
Before | After At Indue
Our warehouse floor at Indue.
-
After | Meat Processing
After at a meat processing facility.
-
-
-
Beveled Edge
Beveling the outer edges of an Indu-Crete patch gives it a smooth transition and extra strength at the spot where it's most exposed to direct impact.
-
Fiberglass Floor Prep
This is what can happen after a while with a fiberglass floor.
-
Loose Pavers
Often found in dairy processing plants, brick pavers are notorious for failing in larger areas that 'sound hollow' below. Indue typically removes the brick pavers and replaces them with Indu-Crete. Or we can install new brick pavers that are set in an epoxy setting material with an epoxy grout.
-
Topcoat
Applying a topcoat over Indu-Crete that's been swept of an excess of ColorQuartz aggregate.
-
-
-
Shavemaster
Our Shavemaster is a 3 phase, 50 amp prep machine that consists of 52 count, 10" diameter, 1/8" wide blades with an 18" patch.
-
-
-
-
-
-
-
-
-
-
-
-
-