Description: Indu-Crete is a polyurethane concrete that is extremely tough, able to withstand thermal shock with the best heat and chemical resistance available.

Coverage: 17 ft² per kit @ 1/4”
Working time: 20 minutes @ room temp
Cure time: 10 hours tack free @ room temp (full chemical cure=24 hours)

The following information is based on the materials used to install 500 ft² on a smooth surface. See instructions for details.

Price per square foot: $5.59
Thickness: 1/4 ”
Down time: 24 hours
Kits of Indu-Crete: 30 kits

Description: 100P is a 100% solids, USDA compliant, low odor epoxy. Competent installation will provide a surface that is heat & chemical resistant with non-skid properties.

Coverage: 40 ft² per gallon @ 40 mil
Working time: 30 minutes @ room temp
Cure time: 10 hours tack free @ room temp (full chemical cure=7 days) *Fast Hardener available for cooler temps or for quick cure. Not recommended for top coat due to hazing.

The following information is based on the materials used to install 500 ft² on a smooth surface. The type of coating is called our Double Coat system using 45-55 as the aggregate. See instructions for details.

Price per square foot: $4.04
Thickness: ↓ 1/8”
Down time: 48 hours
Gallons of 100P: 2g
Bags of 45-55 aggregate: 10 bags

Description: Fast Hardener is an additive for the regular hardener used in 100P and 200XT. Substitute up to 1/4th of
the regular hardener to cut working time and cure time in half.

Coverage: Replace up to 1/4th of regular hardener used in 100P or 200XT.
Working time: 15 minutes @ room temp
Cure time: 5 hours tack free @ room temp (full chemical cure=7 days)
* Not recommended for 100P top coat due to hazing.

Description: Cabosil is a thickening agent used with 100P. Very fluffy white powder. Add to 100P to add body when filling
cracks, repairing vertical surfaces or to set tile.

Coverage: Dependent upon thickness of 100P. Approx. 15 ft² per gallon of 100P @ ¼” thick
Working time: 15 minutes @ room temp
Cure time: 5 hours tack free @ room temp (full chemical cure=7 days)

WARNING! USE RESPIRATOR! HARMFUL TO LUNGS IF BREATHED IN!

Description: Moisture curing high performance polyurethane sealant which does not require priming on most substrates.

Cartridge: 300ml
Coverage: Dependent upon width/depth of control joint.
Approx. 20 lineal ft on joint 1/4” wide, 1/2” deep.
Cure time: 24 hours tack free @ room temp

Description: NP128 Arctic is a thick, trow- able, 100% solids, USDA compliant, low odor epoxy with EXTREMELY QUICK working and cure times.

Coverage: 8 ft² per kit @ ¼” thickness
Working time: 5 minutes @ room temp
Cure time: 20 min. tack free @ room temp (full chemical cure=7 days)